CP5511 Cable...

bluenoser337

Member
bluenoser337
Join Date
Apr 2003
Location
Nova Scotia
Posts
391
I have a Siemens CP5511 (PCMCIA card) and the HW adapter that plugs into the card, but I don't know if I have the correct male-to-male cable to connect to the 300/400 DP processors. Anyone have the pinout or part number for this cable?
 

Similar Topics

A
Siemens CP5511 PCMCIA Card
Everytime I install the drivers for a Siemens CP5511 PCMCIA card, it assigns an Interrupt Request (IRQ) value from Windows of 19. As the only...
Replies
0
Views
2,573
agrosse
A
J
Problem with CP5511
Hello everybody I have the same problem that this thread Error 0x0316 http://http://www.plctalk.net/qanda/showthread.php?t=13603&highlight=cp5511...
Replies
2
Views
2,347
jm76
J
H
s7200 network cp5511
hi, i have four s7200 connected ppi, somme thing hapened, it's not possible to acceess two of my plc throuth the cp5511 mpode mpi, it found the...
Replies
0
Views
1,383
has
H
N
Siemens CP5511/CP5512
Hi, I'm working with following settings: CPU 319-3 PN/DP CP5511/CP5512 WindowXP professional Siemens S7 V5.4 It was working all fine until I...
Replies
7
Views
5,160
Fred Mau
F
H
CP5511 problem...
I can not have the plc communicated with PG. I have attached both network diagnostic and hardware.What may the reason of this problem.
Replies
3
Views
1,596
10BaseT.
1
Back
Top Bottom