Cross ref report RSlogix500
- Thread starter Christoph
- Start date
rsdoran
Lifetime Supporting Member
The only method I can think of would be to print a report to pdf, you can get www.pdf995.com free. Once it is in pdf you can just copy any information you need and print it.
Mickey
Lifetime Supporting Member
Open Report Options:
Double Click Cross Reference:
Preview Report:
Double Click Cross Reference:
Preview Report:
Ken Moore
Lifetime Supporting Member
Open up the report options, deselect everything except cross reference files.
Then on the left hand project tree, click on the cross reference icon.
When the new window opens, chose the select files option. Then deselect all files, then select the two files you want.
Edit:
Never mind Mickey did it better.
Then on the left hand project tree, click on the cross reference icon.
When the new window opens, chose the select files option. Then deselect all files, then select the two files you want.
Edit:
Never mind Mickey did it better.
Similar Topics
What is the difference between cross ref and find all?
In either the Simantic Manager or in the block editor.
Using the menu commands:
Options
Reference Data
Display
Error= "Error creating an empty...
In the past, we have used AB 1492 feed thru screw terminals a lot. Lead time on these with our distributor is terrible. Is there an almost...
In our production plant we have multiple different networks (subnets). IT dept have setup routing between them so different subnets can...
Is it possible to connect a PC with running WinCC Advanced or Unified to a siemens PLC such as S7-1200 across different subnets? The computers can...