I am trying to achieve communications between a Siemens S5-115U CPU944B and a Proface 2500 series HMI using the second port of the PLC CPU and 3964R protocol without much success. Has anyone achieved this? I have tried several different cables and comms set ups. Siemens second port is TTY and Proface port is RS232 and/or RS422.
Siemens S5 to Proface HMI using 3964R
- Thread starter jdsi
- Start date
Similar Topics
Good day,
I need help locating/dowloading PLC Siemens Saphir SIO ACX32 driver for Proface GP-Pro/PBIII.
I am in the process of upgrading a...
Does anyone have the MPI pinout for the above HMI?
The manual helpfully suggests you buy their pre made cable.
I read a thread that says...
I have a problem with ProFace panel (GP-4301TM). My Setup is as follows.
Setup:
1 HMI-Device Siemens MP377
1 PLC (IM151-8 ET-200S)
1 ProFace...
I am new to using the Proface touch panel. Currently for a project i need to link a Siemens S7-314 PLC with the Proface 5.7" Touch panel...
Anyone done before for the communcation between proface touch screen GP2500S with the siemens S7-300 CP340.
The program provided by proface...