Toshiba T2 485 Port

mcalidl

Member
M
Join Date
Aug 2006
Location
Birimingham, AL
Posts
50
I have a toshiba t2e plc with processor 234e with optional 485 port and have been unsucessful trying to get the tpds software to talk through an external lantronix device server converting the 485 to ethernet. However, we have been able to get it to work with the 224 processor. Does anybody have any experience with this or know the difference between communication on the 224 processor vs. the 234e processor? Do I need any terminating resistors anywhere?
 
Last edited:

Similar Topics

V
Toshiba T3 PLC Computer Link <-> RS-485 (real time data extraction)
Hi everyone, I need to interface an external PC with a Toshiba T3 CPU (model PU326H) in order to read data from several 'F' registers. The...
Replies
0
Views
2,840
vincentc
V
M
Toshiba G3 Can't access to menu parameters trohugh lcd display
Hi, I have two Toshiba G3 Tosvert-130, one of them I can see monitoring mode, I can control with the LCD display, recently I changed the presets...
Replies
1
Views
345
JeffKiper
JeffKiper
OkiePC
ML1500 to Toshiba VF AS1 via Modbus RTU
I inherited a system with the Micrologix 1500 talking to 8 VFDs using Modbus RTU protocol. One of the VFDs was replaced with a Toshiba VF AS1...
Replies
1
Views
1,202
OkiePC
OkiePC
P
Toshiba EX100
Another software thread! We have a Toshiba EX100 that's just been working away quietly in a panel for 20 years, never causing a problem to...
Replies
1
Views
1,202
kennadrin
K
J
Toshiba VF-S11
Hi, Any body had success to change parameters in between a Toshiba Inverter VF-S11 using a Red Lion any series (mine is K304), and MODBUS RTU...
Replies
1
Views
1,153
goghie
G
Back
Top Bottom