Connecting to DF-1 Half Duplex Master

Hello All,

I have configured a SLC 5/04 with one serial port for half duplex master. I have had to set it up this way to communicate to some remote PLC's over radio modems. Now that this serial port is configured as such, how do I connect and go online with the PLC using my laptop. I have tried regular DF-1 driver with half-duplex set and auto-configure etc etc. Anything I am missing????

Thanks for the help!!!

Use DF1 slave driver in rslinx to connect to slc 5/04, If not happening then use DH+ (CH01)of SLC