1756-sim

Anyone know how to set this module up in a RSL5000 project? It has to be set up as a generic module. I don't know what parameters / comm format to use. There doesn't seem to be any docs available for the module (I looked)

Thanks

Mike

As far as I know this module is not available for sale, it does exist for internal RA use only, so no public information available.

You probably should contact the person who gave it to you.

I would try using an I/O entry for an ordinary 1756-IB16 or -OB16 module and disable electronic keying. Those modules are usually used by module developers and I didn't even find any internal documentation on them.

If you were going to try a Generic module type: Generally the Input Assembly is Assembly 1, the Output Assembly is Assembly 2, and I use 0, 3, or 4 for the Configuration Assembly. Size varies by module; I'd try 32 for the SIM.