Wondering if following is possible.
PanelView (DF1) Terminal ---------DF1------------SLC 5/04(DF1)
While PV and PLC are connected, want to be able to link up with the PLC via the same DF1 channel to a PC running RsLogiX500 for monitoring and editing logic on the CPU.
Can a custom made Y adaptor be used for the following set-up without any comm conflicts or is this even possible?
Thanks a Bunch!
PanelView (DF1) Terminal ---------DF1------------SLC 5/04(DF1)
While PV and PLC are connected, want to be able to link up with the PLC via the same DF1 channel to a PC running RsLogiX500 for monitoring and editing logic on the CPU.
Can a custom made Y adaptor be used for the following set-up without any comm conflicts or is this even possible?
Thanks a Bunch!
Last edited: