Have an alarm project with a fluid delivery system There are 8
systems all connected to 2 delivery lines manifold 1&2. only 1
system is active on a manifold at a time. Usually 2 systems are
active at a time. The person developing the
MMI wants alarm bits specificly for the system that is active
and also denotes what manifold it is on, as any system can be on
any manifold. I all ready have the alarms created.
I also have bits for which system is active and on what
manifold it is supplying.
Any slick ideas that won't require a ton of programming.
systems all connected to 2 delivery lines manifold 1&2. only 1
system is active on a manifold at a time. Usually 2 systems are
active at a time. The person developing the
MMI wants alarm bits specificly for the system that is active
and also denotes what manifold it is on, as any system can be on
any manifold. I all ready have the alarms created.
I also have bits for which system is active and on what
manifold it is supplying.
Any slick ideas that won't require a ton of programming.
Last edited: