SLC 5/05 remote I/O scanner
- Thread starter Christoph
- Start date
averytc
Member
- Join Date
- Jul 2002
- Posts
- 114
You can have up to 4 racks of discrete I/O. More information can be found http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1747-um013_-en-p.pdf
Regards
Regards
Similar Topics
using 1747-sn remote scanner to 1771-asb with a 4 slot rack
set up as rack 2. We hav a sim card in the first slot of the
remote rack. when we...
Good afternoon all, I have a SLC 5/04 that I want to add more i/o to, but all out of space on the backplane and no room to increase backplane...
Hi all
I have a legacy PLC (1747-L552C) and I have been asked to look at remote access (it's communicating via ethernet to a PVPlus6). I have an e...
Good Morning ,
I need to make a online change to a SLC 500 5/05 . Is it safe to turn the key from Run to Remote with causing the processor...
Hi;
At one of our machine, there is SLC5/05 installed. Due to some more I/Os increased at other parts of machine, we want to connect the extended...
