Hi everyone, i am hoping someone my be able to help me. I have a client that wishes some hard copies of the PLC Code in 3 TSX47-40 PLC's. I rented out a TFTX507 Programming Terminal after speaking to someone at Schneider Electric in the UK, who now deal with Telemecanique products. I visited the site today and have sucessfully uploaded the code from all 3 PLC's.
My problem now is how to get print out of the ladder code which i uploaded. I have connected my printer using the comm port of the side of the programmer, opened the printing option, selected print (i think) but nothing happens. I figure i not doing something.
If anybody can shead some light on what i'm doing wrong i'd be most grateful.
Big thanks for any help
Martin
My problem now is how to get print out of the ladder code which i uploaded. I have connected my printer using the comm port of the side of the programmer, opened the printing option, selected print (i think) but nothing happens. I figure i not doing something.
If anybody can shead some light on what i'm doing wrong i'd be most grateful.
Big thanks for any help
Martin