Sy-Max and BACnet

Anyone know how I can interface with a Square D Circuit Monitor with a BACnet system. The CM uses Sy-Max. I think I will need an SPE4 to convert to Modbus and I have a Modbus to BAcnet gateway. Any ideas?

Thanks,
Brian

Sounds like you are doing it the right way. If you do not have a Sy/Max rack, you may want to look at NR&D's MUCM device instead of the SPE4.

The MUCM can be used as a protocol convertor. http://www.niobrara.com/mucm_cut.html

Thanks. I'll check it out.