Slc 5/01 Low Batt

Jezz

Member
Jezz
Join Date
Dec 2002
Location
Kendal
Posts
399
Does any one know if the low batt indicator bit (s:5/11) works on a SLC 5/01 as if you look in the status file its not shown when the display is structured but it is displayed when the display is binary...

:confused: :confused:


Thanks Jezz
:)
 
Bat Bit

Jezz,
According to my SLC reference manual, the battery low bit is not available in the 5/01. I think that is unusual for an AB processor but that is what is says. Sorry!
 

Similar Topics

C
SLC 5/05 slow processing with Panelview Plus 6
I have an issue with an Allen Bradley SLC 5/05 program acting “slow”. A few months ago, I noticed an issue with a part of my PLC program not...
Replies
1
Views
1,313
OkiePC
OkiePC
J
Factorytalk View SE Local Station Sluggish/Slow Response to SLC 5/05
I am upgrading one of our sites from Rsview32 to Factorytalk View SE Local Station on Win10 and I have the program all set up and switched over...
Replies
3
Views
4,120
JKam55
J
R
slc 505 slow ethernet comms
I have a SLC 5/05 with really slow Ethernet comms. It is on a network with three Proface screens but comms is just as slow when I connect directly...
Replies
6
Views
3,923
JaxGTO
JaxGTO
R
SLC 500 - S:5/0 Math Overflow Trap
We are getting a fault...... Math Overflow Trap S:5/0 = 1 Apparently we are getting a value greater than 32767 or less than -32766. If...
Replies
6
Views
7,822
kamenges
K
B
Slc 5/05- flow totalizing
AB SLC 5/05 RS logix 8.40 I have two existing flow totalizers on site that are currently reading 300000 m3 and the other around 70000 m3. These...
Replies
3
Views
1,979
bfranklin
B
Back
Top Bottom