Write L5k Logic on CF-card

joto

Member
J
Join Date
Feb 2006
Location
Gothenburg
Posts
1
Hello guys.
I have a small question for you. We use a CF-card in all our machines (Control/Compact-Logix Cpus) to store the application. We read the image on the CF-card when the cpu starts up.
Is there a way to write the image directly from my LapTop instead from doing it via L5k connected to the PLC?

BR Tobias Johansson
 

Similar Topics

T
Write .l5k or .acd file to ControlLogix CPU
I would like to know if anybody knows of a product or method, other than RS5000 which allows the user to write a modified .l5k or .acd file to an...
Replies
0
Views
3,275
tadg
T
M
GP Pro/PBIII How to write text to LS area
Hi everyone, I hope you're all doing well. I'm currently working on updating an HMI project for the GP2500, and I've encountered a bit of a...
Replies
1
Views
87
mrsv
M
J
Requesting assist with learning how to write "call" for pressure and "make" pressure on booster pump with Zelio FBD?
I've gotten to the learning curve where I can program a call for pump to come on at set point but I'm not sure how to turn the same pump off when...
Replies
1
Views
130
JoeM61
J
P
Sharing a read/write modbus register
Hi everyone, I am working on a project that needs to expose the SV (Set Value) of a temperature controller to a SCADA system. SCADA <-...
Replies
4
Views
159
OkiePC
OkiePC
J
RSLogix 5000 and Cognex In-Sight Explorer 5.9 - Will not Read/Write data
Thank you for any and all responses/help. I have an RSLogix 5000 v20 and a Cognex In-Sight v5.9 spreadsheet (8502P). I can not figure out how to...
Replies
0
Views
127
JEM
J
Back
Top Bottom