WinCC redundant bus to S7-400 H

Gromit

Member
Join Date
Jun 2006
Location
-
Posts
119
Hello,

The only option for redundant connection from two redundant WinCC PCs to a S7-400H system is industrial Ethernet and Redconnect software, right?
Can we establish a redundant connection, based on Profibus?

Regards
 

Similar Topics

dear all, i'have set redundant server Wincc SCADA configuration with 4 client applications. redundancy is enabled and is working properly...
Replies
0
Views
1,454
Hello, Could you please take a look at the attached scheme in PDF. I'm planning such a single-user redundant system. I can not understand how...
Replies
1
Views
3,086
In our production plant we have multiple different networks (subnets). IT dept have setup routing between them so different subnets can...
Replies
0
Views
49
Is it possible to connect a PC with running WinCC Advanced or Unified to a siemens PLC such as S7-1200 across different subnets? The computers can...
Replies
0
Views
53
We are using wincc scada WinCC system software V7.5 SP2 , connected to few plc . Past 3 weeks we getting this alarm continously when we checked...
Replies
0
Views
64
Back
Top Bottom