Mitsubishi FX-16MR-ES/UL

dholmes

Member
Join Date
Jan 2007
Location
Oregon
Posts
1
I have an older Mitsubishi FX-16MR-ES/UL with older version software 3 1/2 in. disk and 12v key. Never used. Any value?
 
Probably very little unles you find someone who really needs one.


Good luck, you could also use it to automate your house or something.
icon7.gif

Marc
 
Although it is only a small I/O plc and obsolete and the software will probably be Medoc, it is still of some use to someone that would like to learn Mitsubishi.

It is programmed using the 'still used' SC-09 cable and the instruction set is almost the same as modern mitsubishi FX series plc's

In fact, the Mitsubishi FX-16MR-ES/UL is a very powerful plc with a lot of math functions the middle range FX series still dont have.

Someone somewhere would buy it.
 
I agree, it is not worthless by any strech of the imagination, especially as a learning tool. Those little FXs last forever (that is untill they go swimming) but I have seen some of these guys take a bath and actually keep working for up to a year!


Solid little machine

Marc
 
They definitely dont like coffee washing around inside.
Had one powered up on my desk when the coffee jumped out of the cup and into the plc.
They make an impressive sounding BANG lol
 
Goody,

We have had several customers INSIST on a nema 4X cabinet and then let thier own "in house" electrcians drop EMT into the top of the control panel. They will punch a 3/4 hole in the top of the cab and put 1/2 inch conduit into the "hole". and cover the space with electrical tape.
ITS A WATER SYSTEM! FOR THE LOVE OF (insert your god here)!!!!

They blew one from condensation dripping water off of a cooling water line above the control panel. It was a 120 volt system so it shorted out and burned the contacts on the top of the PLC.

I fixed it with silly putty (the plumbers version) for the hole and gave them a new PLC. The PLC... rust stains and all... is still somewhere in the office with a pigtail waiting for a new program for testing.

We use it all the time, I just wouldn't rely on it for biotech research which is what they were using it for.

Tough little dude is the FX

Marc
 

Similar Topics

I have several of the older FX model programmable controllers along with the two dozen that we are using. Having problems communicating with the...
Replies
4
Views
1,632
Dear : I have bought a liyan EX1N16MR PLC,Yesterday i programed it for ADC conversion.after uploading it to plc by using GX-Developer when i gave...
Replies
12
Views
4,877
I'm looking to get some spare keys for this PLC. Does anyone know a source or have a part number? My searches are turning up nothing at the moment.
Replies
1
Views
64
I'm struggling to get an FR-E800SCE to work on CC-Link IE TSN. I'm sure the issue is with the drive, when I plug in the network cable I get no...
Replies
1
Views
89
Hi , Where i can find Mitsubishi PLC Card end of line & replacement model details. i am looking for Q02CPU replacement model. Please advice. thanks
Replies
2
Views
126
Back
Top Bottom