Micrologix 1000 HSC

ggchavhan

Member
G
Join Date
Nov 2006
Location
pune
Posts
135
Dear all

I want to configure 660 ppr encoder to micrologix 1000 I used HSC instruction as per help I turned on C5:0/UA bit on, but I am not getting high speed pulses for measurment, It is scanning as per regular scan, i.e. PLC is missing some pulses during the same scan. Please guide me in this regard.

Thanks.
 
there is a specific routine for HSC the counter should be in that routine to do high speed function
I don't know which routine it is I don,t have RSL500
 

Similar Topics

H
hsc micrologix 1000
I need help how to use hsc instruction in micrologix 1000
Replies
2
Views
2,505
kunal07
K
Z
Micrologix 1000 w/HSC and Flow Meter
I am setting up a compact and low cost machine that will dose between 15 and 60 ml of liquid depending on the setpoint the user inputs. I have set...
Replies
1
Views
4,009
Pierre
Pierre
M
Micrologix 1000 query
Hi all, We have a very old pit pump system running on Micrologix 1000. Now, whenever there is an alarm for high conductivity, we want that alarm...
Replies
5
Views
1,245
Ken Roach
Ken Roach
T
Micrologix 1000 Software
Looking at a Micrologix 1000 1761-L32AWA, I tried to connect using the 1761-CBL-PM02 through a Serial to USB converter (This setup was used...
Replies
2
Views
976
James Mcquade
J
B
Micrologix 1000 to 1400 Conversion
Hello All I am trying to convert a ML1000 program for use in a ML1400. I didn't create the original program & documentation is non existent...
Replies
14
Views
4,393
drbitboy
drbitboy
Back
Top Bottom