Mitsubishi F2-40

Hi all,
we have a old Mitsubishi F2-40 and GP-20 programer all I need to do is verify the prog we have on Eprom is the same as the one in the plc any tips on how to do this would be great as I haven't got a clue I can go on line and monitor but this is all a bit old for me give me RSLogix 500 anyday..


Thanks Jezz

Its a while since I did this but I think you need an eeprom box (I dont know off hand the number)
The GP-20 then plugs into that with the eeprom plugged into the socket.

You can then program the eeprom directly or check what is on it.

A customer of mine has one somewhere in a dusty drawer. If you need numbers or more info I will dig it out.