skeeter225
Member
Will a program from a 900 download into a 550 and everything work.I have a 900 that I would like to replace with a 550 because we have one in stock and don't want to buy a new 900.Thanks.Phillip
Panelview 900 replacement with a 550?
- Thread starter skeeter225
- Start date
LJBMatt
Member
Maybe. First they both need to be the same variety keypad, touch, or both. Then since the 900 has a higher resolution than the 550 you will probably have to do some editing to make it work. All i can say is try it in Panelbuilder and see how well it converts. If the comms are different you will have to make changes to accomodate that also.
Similar Topics
Hi,
I'm trying to figure out how to properly update the "icons" on my Panelview 900 (AB 2711-T9C9). I think maybe I'm having a fundamental...
Panelview 900 communicates with SLC 5/03 PLC. When I upload the program from the panel, some buttons have the address B3/306, B3/304 etc. However...
Panelview Part #: 2711-K9A8, that communicates via DH+ to a SLC504.
There are two PV's on the network. One has lost its application. Downloaded...
A question for the hive mind, i have a Panelview 900, monochrome non touchscreen model.
On power up, i get error 34 which relates to an extended...
I have those old early 90's panel views in my plant. I use an old XP image to get the program back into them but maintenance wanted a way to do it...
