Allen Bredley PLC

Dear Sir,

Kindly Tell me about 4 Ch analog Input Card (4~20 mA) configuration for Digital output. We have Micrologix 1200 Controller and 5 Nos of analog Inpu Cards.

What function block is used for this purpose. The programmining Software is Logix 500.

Regards,
Zubair
[email protected]

Can you re-state the question? I gather you have a micrologix 1200, but that's about all.

PLC Programming

What are the Basic Function Blocks for Analog Input

Zubairkp514 said:

What are the Basic Function Blocks for Analog Input

Click to expand...

There are no Function Blocks associated with analog inputs for AB

http://literature.rockwellautomation.com/idc/groups/literature/documents/in/1762-in012_-en-p.pdf

That is the manual for the module

http://literature.rockwellautomation.com/idc/groups/literature/documents/um/1762-um001_-en-p.pdf

manual for the M1200