Mitsubishi advance course?

Hi guys,

I've some experience in Mitsubishi FX series PLC. There is an advance course in Mitsubishi Q series PLC organised by my company (Mitsubishi trainer will be coming to our office to conduct the training to us). The subject can be customized according to our preferrence. I'm looking forward for topics like:

1) configuring serial port for printing
2) Programming using indirect addressing
3) PID tuning
4) programming with floating point
5) configuration & controlling servo motor

What other subject that should be bring up in this advance training? Please throw in your comments.

Thank you.

CC-LINK remote I/O


It works well but it took me 24 hours of scouring manuals to figure that POS out.

We probably lost more money implementing it's roll out on the FX than it saved in wiring costs.

I think there is a configurator in GX for the Q

Marc

How long is the class? what you have listed plus what Marc listed that could take over a week, the PID would last 3 days if you want to get deep, setting up CC link in a Q did not seem that bad, setting up Ethernet was more of a issue