AB Panelview 550 Pin Assignments

I am replacing an Automation Direct DP-C320 screen with an Allen Bradley Panelview 550 (The PLC is an AB SLC 5/03). Besides the fact that the DP-C320 takes a male DP-9 connector and the Panelview needs a female plug, are there any pin assignment conflicts I should be worried about, or are the assignments the same with both units?

Thank you

-Joe

Can you post the full Catalog Number for the PV550?

Catalog number for the PV 550 is 2711-T5A 16L1

Ser: B
Rev: E
FRN: 4.46

Thank you

1 - 1
2 - 2
3 - 3
4 - 4
5 - 5
6 - 6
7 - 7
8 - 8
9 NOT CONNECTED AT EITHER END

RS232 DF1 port
Edit: must type faster