Downloading problem with 140CPU43412A

shaikhferoz29

Member
S
Join Date
Feb 2007
Location
India
Posts
1
Dear All,
When I try to download programme in 140CPU43412A,follwing error occures

"Controller type does not match the PLC type set in configuration database"

Controller used - 140CPU43412A
S/W used - Concept 2.2 SR2
Communication - Modbus, through RS232 data cable

kindly hepl me on this

Thanks
 

Similar Topics

D
Problem with downloading TwinCAT 3 project
Hello everybody, I have a problem with TwinCAT 3. When I try to activate a configuration and start IPC in Run mode I receive an error AdsWarning...
Replies
3
Views
5,651
Iman
Iman
A
S7-400H Downloading problem
Dear Friends Please I face problem with Simatic PLC S7-415H , I can go online throw IP/TCP network and uploading the logic from PLC too PC but...
Replies
2
Views
1,779
cardosocea
C
S
Crimson 3 Redlion G315 Software Problem When Downloading
Hi guys!! Back again with another issue... Im currently working with Crimson 3 and a G315 HMI. While working on a database I previously...
Replies
3
Views
2,456
Sombrero
S
N
Problem downloading in RSNetworx for Devicenet
Hi All! I added a combination I/O module 1794 IE4 XOE2/B to the end of 1794 RIO devicenet node. In RSNetworx for Devicenet V11 (CPR9) for some...
Replies
5
Views
5,159
danger86
D
A
Mitsubishi:Problem with downloading program to Q PLC
I have a Q00 PLC from a customer who want to modify some in Main program. First I upload program from PLC using GXWork 2. Everything is ok. But...
Replies
0
Views
4,417
anhtuandrg
A
Back
Top Bottom