Hey guys,
I have been trying to set up s7-200 and Mc45 together. Followed the instructions on the siemens site http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=21063345&caller=view
Tested my modem with AT commands and it works perfect.
The problem is it dont work with the PLC. I used the test program on the siemens site. But i am not able to send or receive any sms.
Thats why i a dropping this here. Maybe some of you experienced the same problem and help me through it.
thanks a lot
I have been trying to set up s7-200 and Mc45 together. Followed the instructions on the siemens site http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=21063345&caller=view
Tested my modem with AT commands and it works perfect.
The problem is it dont work with the PLC. I used the test program on the siemens site. But i am not able to send or receive any sms.
Thats why i a dropping this here. Maybe some of you experienced the same problem and help me through it.
thanks a lot