Hello all,
I have had to add some new panels recently and can't really make any sense of the numbering method used previously and would like to correct this. In one case a panel, FP-1, would be the panel containing the plc but then another panel containing some magmeter controllers or other transmitters connected to the plc would be labelled 3-1-2. I cant find panel 3-1-1 or 2-x-x etc. There are other examples but that probaly wouldn't help. I'm wondering if there is a standard or other conventions y'all use.
Thanks in advance...Von.
I have had to add some new panels recently and can't really make any sense of the numbering method used previously and would like to correct this. In one case a panel, FP-1, would be the panel containing the plc but then another panel containing some magmeter controllers or other transmitters connected to the plc would be labelled 3-1-2. I cant find panel 3-1-1 or 2-x-x etc. There are other examples but that probaly wouldn't help. I'm wondering if there is a standard or other conventions y'all use.
Thanks in advance...Von.