CP5511 with S7 Ver. 5.4

tlynyrd

Member
Join Date
Apr 2006
Location
Va-Beach
Posts
9
Hi,
I'm having problems with "older" CP5511 PCMCIA Card. It seems like it does not work with Step 7 Ver. 5.4
Was at Siemens website to get drivers, but nothing seems to help. Has anyone a driver that might fix this problem? Or do I have to buy a CP5512... 🤞🏻

Thanks in advance!
 
I'm using a CP5511 with Step7 V5.4 with no problems. Sorry but can't suggest anything to help though.
 

Similar Topics

Everytime I install the drivers for a Siemens CP5511 PCMCIA card, it assigns an Interrupt Request (IRQ) value from Windows of 19. As the only...
Replies
0
Views
2,566
Hello everybody I have the same problem that this thread Error 0x0316 http://http://www.plctalk.net/qanda/showthread.php?t=13603&highlight=cp5511...
Replies
2
Views
2,342
hi, i have four s7200 connected ppi, somme thing hapened, it's not possible to acceess two of my plc throuth the cp5511 mpode mpi, it found the...
Replies
0
Views
1,378
Hi, I'm working with following settings: CPU 319-3 PN/DP CP5511/CP5512 WindowXP professional Siemens S7 V5.4 It was working all fine until I...
Replies
7
Views
5,152
I can not have the plc communicated with PG. I have attached both network diagnostic and hardware.What may the reason of this problem.
Replies
3
Views
1,591
Back
Top Bottom