WinCC flexible transfert project to TP177A

Hi,
The communication between my Wincc flexible and TP177A is not working properly. When I like to transfer the project there is a 'transfer Window' and the project is compiling before the transfer.
But when the compiling is done, the transfer window disappear and there is no transfer (and no error code). But I can update the OS-System from the TP177A and ask the device status !! I think there is something wrong with the Wincc flexible and not with the hardware commubnication with the TP. Thanks and kind regards

...But I can update the OS-System from the TP177A and ask the device status !! ...

Click to expand...

So, did you perform an OS update with this (apparently failing) version of WinCC flex?

Are you using an MPI, Profibus, or serial connection to download?

...But when the compiling is done, the transfer window disappear and there is no transfer (and no error code). ...

Click to expand...

Almost as if you would have selected 'Check Consistency' instead of 'Transfer Settings'. Yes, this is very weird! Have you tried rebuilding the project (Project -> Compiler -> Rebuild All...)?

Does your compiling really go through? Have you checked the output window messages? View-->Output.

If there is a problem during compiling the compiling just stops and the tranfer window dissapears. The stopping result you can see in the output window.

Both Sparkz and Miika are right.
1st select that the "output window" is displayed.
Then use the "rebuild all" function.
If there are errors, then you have to correct them, and rebuild again.
If there are no errors, then proceed with transfer to the panel.

Many Thanks

Many Thanks, Guys.
I had the same problem. Just reading your thread helped me out. Thanks a bunch )

I have the same problem, what happens is that on the output window it is displaying tranferring to device, but nothing is happening. The TP177A is in transfer mode, I have done an OS update which indicates that my communication settings are fine. I am using WinCC Flexible 2007 Hotfix 4.