TSX Momentum Run Command

Joe Oliphant

Member

J

Join Date

Apr 2007

Location

California

Posts

2

• Apr 11, 2007

• #1

Is there a way to send a run command or some other way to put a Momentum PLC in run mode without Concept or some other software package?

-Joe

 

Cowboy1

Member

C

Join Date

Mar 2007

Location

Toronto

Posts

7

• Apr 11, 2007

• #2

Can you explain a little more.
Do you have the software?
Do you want to stop and start the run command from another location.
It really is not safe to do so,Let me know I would be glad to help you out

 

Joe Oliphant

Member

OP

J

Join Date

Apr 2007

Location

California

Posts

2

• Apr 11, 2007

• #3

Run Command

No, I don't have Concept or any PLC software. I used Schneider's Web Loader program to upload some pages and it stopped the PLC to load the pages. It was supposed to restart it; however, it wouldn't. It appears I will have to get Concept.

-Joe

 

Cowboy1

Member

C

Join Date

Mar 2007

Location

Toronto

Posts

7

• Apr 11, 2007

• #4

Ok

Sorry i could not help you but yes you will need concept