Hi, I need a 0-1500 Hz digital pulse output from a S7-313C PLC for pulse control of a step motor. What's the best way to handle this? I can't use the regular DOs, as the highest pulse I can output is limited to about 200-500 Hz by the scan time. Thanks in advance.
High frequency digital ouput on Siemens S7-300
- Thread starter dfdgdsd
- Start date
Similar Topics
Looking for suggestions on a pathway for a high speed, variable frequency output for a slitter line. There is a corporate data collection system...
Hi - off topic but hopefully someone has some experience.
I am looking to install a level detection unit for monitoring fill levels in bottles...
Hi everyone,:cool:
I have been facing the problem of encoder (1024 ppr) not reaching to its desired position while in auto mode.
The PLC fault...
I have a problem with an induction furnace heat treatment makes it a car part, it does generate heat through high frequency induction that...
Hi friends;
I use a APU 300 frequency module. Configured as TYPE A counter. The application as under
Magnetic pickup signal came into the...