mostafah
Member
hello every one!
i have a pu235n(T2N CPU),i can program it through serial port, but i cant connect it via ethernet.how can i set its ip?i found this program in its manual:
i have a pu235n(T2N CPU),i can program it through serial port, but i cant connect it via ethernet.how can i set its ip?i found this program in its manual:
This program is executed by turning on the R0502 A contact.
Parameters: 12544:3100H, 00018:0012H
29061:7185H, 02658:0A62H
|R0502 R0602 |
1|-| |-----------------------------------------------------------( )--|
| /* Parameter setup request */
|R0602 |
2|-| |-+[ 12544 MOV RW000][ 00018 MOV RW001]--------------------------|
| | /* Designates the module and sets the CMD number. */
| | |
| +[ 29061 MOV RW002][ 02658 MOV RW003][ 01025 MOV RW004]--------|
| | /* Sets the IP address, Port number. */
| | |
| +[RW000 SEND RW010][ RST R0502]--------------------------------|
| /* Sets the request. */
| |
but it did not work. can any body help me?
mosrafa havaeji