Using the PLC05 how do I convert this floating point value to decimal?

piscis · Apr 28, 2007

I’m using a 05 PLC which cannot handle real (floating point) numbers. The operator must enter the cut length into the C-Micro panel. (I used a floating point variable so the panel displays the fractional cuts entered)

Question:

Using the PLC05 how do I convert this floating point value to decimal?

piscis · Apr 29, 2007

This is how I did it, tested it and works fine.

piscis · Apr 29, 2007

Note:

Do not use the floating point at the micro panel, use instead a BDC 32

Using the PLC05 how do I convert this floating point value to decimal?

piscis

Member

piscis

Member

piscis

Member

Similar Topics