TD 200 Alarm

manmeetvirdi

Member
Join Date
Oct 2004
Location
India.
Posts
750
hi

Iam using TD200 Ver 3.
Problem is Iam unable to pop up the alarm screen when alarm condition occurs.
I'am enabling the bit LB_ECO (defined in TD200 wizard under the heading "symbolic name for this alarm") when alarms condition occurs through TD_ALM_X subroutine.
When LB_ECO bit is enabled, only thing iam getting is blinking Exclamation and not the Alarm Message.

Regards,
Manmeet.
 

Similar Topics

Dear, I have a room which is being served by FM200 panel and fire alarm panel is used for monitoring, in case of smoke detection, FM200 panel...
Replies
2
Views
2,863
Hello! I use SIMATIC S7-1214C PLC. I am controlling with it a farm (lights and food lines). I bought already a GPRS modul CP1242-7. I want the...
Replies
4
Views
5,317
Im using a TD200 with a S7-200 PLC. I have configured the alarms, and i have set it to default to operator/user screens not alarms at the...
Replies
1
Views
3,802
Greetings:o: I have a S7 224 and a td 100C connected programmed the user screens and 4 alarms. I generate an alarm but the screen shows no alarms...
Replies
1
Views
3,117
Hi can anybody give me some advise on setting up the alarm page on the s7 1200 plc and basic hmi.I have set my alarm word to mw150 and have a...
Replies
8
Views
6,367
Back
Top Bottom