jaconian
Member
Does anyone have the pinouts for this cable to connect PC to PanelMate? Part# is 0158
PanelMate SerialCable
- Thread starter jaconian
- Start date
MartB
Lifetime Supporting Member
Not sure if this is correct or not - use at your own risk !!!!!
I'm assuming you got the part number wrong and meant 0518.
I think page 8 onwards describes the pinouts but only for certain models from what I can tell.
http://www.eatonelectrical.com/unsecure/cms1/MN04804002E.PDF
Mart B
I'm assuming you got the part number wrong and meant 0518.
I think page 8 onwards describes the pinouts but only for certain models from what I can tell.
http://www.eatonelectrical.com/unsecure/cms1/MN04804002E.PDF
Mart B
Last edited:
MartB
Lifetime Supporting Member
Glad I could help - hope it works for you.
Similar Topics
Good morning, i have a problem with panelmate 5000 pp.
unfortunately I pressed the 3rd and 5th keys while booting the Panel.
Now , the alternate...
Does anyone know how I can view the configuration file of a Cutler Hammer *.pps file without the software?
I need to see what IO is controlled by...
I recently converted a lm90 program to proficy by using the import feature on proficy. The program seems to have converted correctly and can...
I have a damaged PanelMate ePro HMI and looking to swap it out with a PView or C-More. I have the Panelmate project but not the Canvas software...
Does anyone know of a modern HMI that can use or convert a Panelmate PPS file?