O/T Kuka robot question.

MartB

Lifetime Supporting Member
Join Date
Jun 2005
Location
Pinellas Park, FL
Posts
684
Is it possible to change the devicenet address of the robot?
I will have 2 robots on the same devicenet in one of my projects, obviously I need to change the address of one of them.
I can't find anything about it in the manuals.
 

Similar Topics

Hi all, First time posting here. I have a Omron NX1P2-1040DT controller that I intend to use for a small project. I also have a KUKA robot that...
Replies
3
Views
1,112
Hello, I need to establish a CIP safety communication to a KUKA KRC4 robot. The KUKA has the IP 192.168.11.53. I already established a standard...
Replies
10
Views
10,152
Hello, I have a new project with a kuka robot. Does someone have to share a FB/FC in Step 7 to start and command a KUKA Robot? If is possible in...
Replies
3
Views
1,937
Hello, I have to communicate with a KUKA robot (Type KRC4 with EthernetIP Interface). For that I use the Generic Ethernet Module with the...
Replies
5
Views
6,765
Hi, I'm working in a project in which I need to put 2 kuka robots as slaves in a profibus dp network. The master is a wago ipc plc. My problem...
Replies
0
Views
4,242
Back
Top Bottom