LG plc

Amr Hassan · May 10, 2007

i failed to communicate btw kgl-win software and lg plc master-k120s

what should be the communication parameters

When i have the switch on the ram position

i have the power led red
the run led off
the error led is blinking

When i have the switch on the rom position

i have the power led red
the run led off
the error led is not blinking

Pierre · May 15, 2007

Amr Hassan said:
i failed to communicate btw kgl-win software and lg plc master-k120s

what should be the communication parameters

When i have the switch on the ram position

i have the power led red
the run led off
the error led is blinking

When i have the switch on the rom position

i have the power led red
the run led off
the error led is not blinking

Most of the time when the error LED blinks you cannot comunicate with GMWin except to reset the whole darn thing.

So go to the Online-Reset menu and just clear it all.

Then try again, and download your program in it.

Should work if all else is OK... (Cable, com port, etc)

LG plc

Amr Hassan

Member

Pierre

Lifetime Supporting Member

Similar Topics