mehmetyil_99 Member M Join Date Apr 2007 Location kayseri Posts 10 May 21, 2007 #1 Hi all is there a way to convert s7 programs to clx 5000 program ? Best regards,
10BaseT. Member 1 Join Date Mar 2006 Location Wrexham Posts 329 May 21, 2007 #2 No , there are very little common ground between the two platforms , a rewrite I am afraid .
JesperMP Lifetime Supporting Member + Moderator Join Date Feb 2003 Location ᚴᚬᛒᛅᚾᚼᚬᚠᚾ Posts 16,306 May 21, 2007 #3 If you are in luck, the original program was written in SCL (not STL !). You should be able to copy and paste SCL from STEP7 into ST in RSLogix.
If you are in luck, the original program was written in SCL (not STL !). You should be able to copy and paste SCL from STEP7 into ST in RSLogix.