analog address for input&output (SIMATIC 7)

MAHER

Member

M

Join Date

Jul 2007

Location

CAIRO

Posts

82

• Jul 1, 2007

• #1

HI
I wnat to know the address for analog input & output for ( SIMATIC 7),
and please any application for that .

THANKS FOR YOUR HELPING.

 

Last edited: Jul 1, 2007

CharlesM

Member

C

Join Date

Aug 2005

Location

Arkansas

Posts

1,129

• Jul 1, 2007

• #2

The module is setup in the hardware config for the address. Then you have PIW for analog in and PQW for analog out. You can put the PIW into a variable table but you can't the PQW.

 

dchartier

Member

D

Join Date

May 2003

Posts

1,546

• Jul 1, 2007

• #3

Hello Maher;

Many posts on this forum have dealt with this issue. You can do a Search (at the top of the forum page) on "S7 analog" or something approaching, you should find a lot of information.
Here is one thread that dealt with integrated analog inputs on a S7-313C, recently:
http://www.plctalk.net/qanda/showthread.php?t=30356
Hope this helps,
Daniel Chartier

 

MAHER

Member

OP

M

Join Date

Jul 2007

Location

CAIRO

Posts

82

• Jul 4, 2007

• #4

Hi
Thanks For You , You Add For Me Information About This Subgect.
But I Hopr You Have A Completed Application Which Contains The Following Points:

_ The Configuration For The Module ( Online Or Offline).
_ Addresses
_ The Idetification For Analog Input Signal (0 To 10 Volts) .
_ How Can I Make The Scalling?

 

EKBist

Member

E

Join Date

Sep 2005

Location

City

Posts

101

• Jul 4, 2007

• #5

see http://www.automation.siemens.com/simatic/portal/html_76/techdok_simatic/controller_techdoku.htm#1b
SIMATIC S7-300
Manuals for Analog modules
http://support.automation.siemens.com/WW/view/en/10867370
http://support.automation.siemens.com/WW/view/en/10805166/133300

and Help for FC105 "SCALE" C:\Siemens\Step7\S7BIN\S7RFBL2B.HLP
or F1 in selected FC

 

EKBist

Member

E

Join Date

Sep 2005

Location

City

Posts

101

• Jul 5, 2007

• #6

UltraSonic sensor example

 

MAHER

Member

OP

M

Join Date

Jul 2007

Location

CAIRO

Posts

82

• Jul 7, 2007

• #7

thank you very much sir
iam happy from your information which you added it for me , know ican configure the ( I &O )MODULES.PLEASE CAN YOU GET FOR ME ANY SITE TO ILLUSTRATE AND TO GET (PDF) FILE FOR SCALLING PROCESS ?

THANKS A LOT : MAHER

 

MAHER

Member

OP

M

Join Date

Jul 2007

Location

CAIRO

Posts

82

• Jul 10, 2007

• #8

Hi Ekbist
Thanks For Your Information , Please Can You Get For Me Any (pdf) File To Clear For Me The Scalling Procedure I NEED APPLICATION ON IT .
Maher

 

rsdoran

Lifetime Supporting Member

Join Date

Apr 2002

Location

Birmingham, AL

Posts

7,371

• Jul 10, 2007

• #9

Not sure what is being asked but have you looked at Siemens support site?
http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&caller=view&lang=en&siteid=cseus&aktprim=0&extranet=standard&objid=10805055&treeLang=en