Omron CPM1A and AD041

Hi all.

I am using cpm1a-ad041 analogue card with a CPM1A-30CDR-a-V1.
and a NT2S screen.
How do i scale the output of the ad041 to display in decimal on the screen?
The CpM 1a does not support the scale command.

Thanks in aticipation
Bob

You will need to do this the "old" way, using Multiply, Divide and you may need to Add an offset value.
I do not have an AD041 manual handy, and it may depend on which range you have set, but there will be a range of values that the unit will send to the cpu. Based on this range, you will need to calculate the scaling "multiplier" and offset values.
Proper choice of these values will give you the desired number to display on the NT2S.
Hope this will help.

Thanks for that.
Bob