s7200 with wincc

naishadgosai

Member

N

Join Date

Aug 2005

Location

surat,gujarat

Posts

39

• Jul 5, 2007

• #1

i hv a s7-200 PLC and Wincc as a SCADA.
How can i connect both , i dont want to use a additional hardware with PLC. i hv a CP5611 on SCADA station

 

Marshy

Member

M

Join Date

Apr 2007

Location

Bath,UK

Posts

236

• Jul 5, 2007

• #2

I've connected an S7-200 with iFix using a kepware opc driver.
They do a driver for a PPI connection and a TCP/IP connection.

http://www.kepware.com/Spec_Sheets/Siemens_S7_200.html

http://www.kepware.com/Spec_Sheets/Siemens_S7_200300400_TCPIPEthernet.html

 

dchartier

Member

D

Join Date

May 2003

Posts

1,546

• Jul 5, 2007

• #3

Hello naishadgosai;

Here is a document from Siemens' support website showing all possible connections between WinCC and S7-200s.

http://support.automation.siemens.com/WW/view/en/21918337


Hope this helps,
Daniel Chartier

 

naishadgosai

Member

OP

N

Join Date

Aug 2005

Location

surat,gujarat

Posts

39

• Jul 6, 2007

• #4

yes it is hekpful

Thank you for helpful help....it helps