boyd_man
Member
I have a Micrologix 1500 controller (1764LRP) and I have a Panel View 300 (2711-K3A17L1). I will be communicating to the Panel View from the PLC with cable (2711-CBL-PM05). I’m hoping I can use cable (1747-CP3 SER A) to communicate to my PLC from my PC to program the PLC and the Panel View. The Panel View will be connected to my PLC all the time with cable (2711-CBL-PM05). My question is first I’m sure I can use cable (1747-CP3 SER A) to communicate from PC to PLC but when I’m connected this way will I be able to communicate with my Panel View through the same cable while it is connected to the PLC.