Sending data out of a ML1200

Kyle Grathwol

Member
Kyle Grathwol
Join Date
Dec 2005
Location
Sandusky, Ohio
Posts
129
I have several ML1200's with 2 serial ports. Is it possible to send data out the serial port to a PC that is attached and dump it into an Excel spreadsheet? If so can you recommend a bulletin or publication that explains how to do this?

Thanks in advance for your help.
 

Similar Topics

P
Sending Temp Sensor data From Kepware 6.0 Software to MicroLogix 1400
Hi Everyone, We have Silo System which has temperature sensor and these sensor data will be communicating through RTU unit to the Dedicated PC...
Replies
2
Views
612
parky
P
S
ASCII data sending issue via AWA or AWT at SLC5/05 CPU
Hello, Thanks in advance. How can I send more than 82 characters using AWA or AWT? to Zepra Printer via serial Rs232 communication? Normally I...
Replies
1
Views
758
drbitboy
drbitboy
S
Tia portal question sending data between 2 plcs
Hi all I have a project on the go and would like to send data from a Siemens 1500 to a Siemens 1200 What is the best function to use ,would it be...
Replies
12
Views
4,417
cardosocea
C
U
Best way of sending data between PLCs via Profinet?
Hi all, I've only worked on Profinet once before to talk between a few S7-300 PLCs. I managed to get the system communicating by using the "GET"...
Replies
4
Views
2,555
uptown47
U
I
Sending data from DSE 8610 Power sharing Module to PC
Hi Friends, I want to Integrate data from a DSE 8610 Power sharing Module onto a PC via Modbus. Which amongst the two methods below is better...
Replies
4
Views
2,035
IdealDan
I
Back
Top Bottom