Zelio Ethernet communications
- Thread starter nickarsow
- Start date
sparkysliderz
Member
I know its a late reply but the short answer is no they will not communicate with each other directly.
If you really want to get them talking you will need a hub and then a higher spec twedo plc to do networking stuff.
If you really want to get them talking you will need a hub and then a higher spec twedo plc to do networking stuff.
Similar Topics
Hi.
I am, in fact, not an specialist in PLC's but, in my work we remotely access a gear 500 kilometers away and we have observed, after some...
I set up a Zelio relay for totalizing supply & return flows for a boiler fuel oil a while back. There's a MODBUS over Ethernet card on the...
I've gotten to the learning curve where I can program a call for pump to come on at set point but I'm not sure how to turn the same pump off when...
Hello good people!
Attached is a very simplified version of a Zelio program containing what I am trying to do but it carries the same problem as...
OK, I thought I saved a few bucks buying a "new-open box" cable and it's the old version and SE doesn't support it, no driver available. Anybody...