GE FANUC FAPT Ladder 1

IPSIBilly · Aug 10, 2007

Hello all, I am looking for an old CNC programming software called FAPT-Ladder 1. It was made by GE Fanuc. It is the predecessor of FAPT-Ladder 3 which I already have. If anyone has a copy or knows where I can get one I would really appreciate it. Thanks in advance

Steve Bailey · Aug 10, 2007

GE Fanuc CNC paraphenalia can be hard to get. They generally sell directly to machine tool OEMs rather than to end users. Are there any machine tool rebuild shops in your area? Someone there might be able to steer you in the right direction.

I have FAPT-LADDER II on an old Windows 95 laptop, but I don't know if I still have the installation floppies.

debco99 · Aug 12, 2007

I can probably help you out if you still need it.
Regards

IPSIBilly · Aug 13, 2007

Thanks for the replies, I still have not located the FAPT 1 or 2. I did not even know there was a 2 so I'm not sure which I need. I could definitely use some help though

debco99 · Aug 13, 2007

I can be reached at [email protected]

NIMAMOGHTADER · Aug 16, 2007

dear sir,
if you get this software plz send a copy for me.because i want to get backup from my cnc.

RussB · Aug 16, 2007

This is not public domain software, You should go to GE Fanuc or Fanuc and purchase what you need.

GE FANUC FAPT Ladder 1

IPSIBilly

Member

Steve Bailey

Lifetime Supporting Member + Moderator

debco99

Member

IPSIBilly

Member

debco99

Member

NIMAMOGHTADER

Member

RussB

Lifetime Supporting Member

Similar Topics