Does anyone know much about Hitachi H-series PLC's? I have not used before and the manual I have is not very clear. I am trying to convert an object file (.OBH) to a Ladder program (.PRN) file format. Apparently, the PLC uses the object file, but my ladder editor needs to see a PRN file in order to edit. My software is vintage MSDOS. Any help would be greatly appreciated.
Hitachi H-40DR Help
- Thread starter CUTiger
- Start date
Similar Topics
I've uploaded a raw program from an old Hitachi EC-40HARP that is to be replaced by something else. I have to do some reverse engineering as the...
I have an old Hitachi EC2-28HRP. I have the program files ready to upload into the PLC, but not sure what I need (i.e. software). ActSip E has...
Hi Guys
I have an Old PLC Hitachi EC2-D60HRP that I am in urgent need of the Software to make few modifications
Anyone can I assist with the...
I am posting this as I am at a loss on where else to look. We have a 30 year old Mitsubishi Injection molding machine run by a Hitachi P-250E PLC...
We want to upload program the following PLC, and downloading to Our Spare. And also we want keep program in file .
Could You give quotation for...