IP network addressable relay/contactor

danw

Lifetime Supporting Member
Join Date
Oct 2004
Location
midwest, USA
Posts
3,427
Is there such a thing as a commercially available relay/contactor that is also network addressable (ethernet IP) with a network function that can override the conventional coil signal?

Load is 5 amps @ 120Vac.

Dan
 

Similar Topics

We are having an issue with some servers, with "Teamed NICs" is we plug one cable leg of the team into one switch and the other to another...
Replies
0
Views
51
Good morning fellow sea captains and wizards, I am being asked to do the above and obtain 4 values from each slave, I know about the MRX and MWX...
Replies
27
Views
565
Hi, I am working on a project, where I face a issue with respected to Network Dropout. The PLC is connected to a 16 port unmanaged switch, where...
Replies
7
Views
180
Hi Everyone, Currently we have three plants running with Controllogix PLCs (L72, L73, L74). In each of these plants we have 2 FTView SE...
Replies
0
Views
53
Hi, I am facing an error inside Omron Network Configurator. I have 2 PLC communicate each other using ethernet cable, send signal using Network...
Replies
2
Views
116
Back
Top Bottom