Indranil Banerjee
Member
We are doing a project in one of our steel plants, where we need to communicate with the network of ABB MP200/1 PLCs. We have 18 PLCs(MP200/1) on a network MB300 of ABB. They are communicating with each other and to the VAX (Level II )computers via MG230 gateway of ABB.
Now we want to use a windows based Level II computer which has to get data (to and fro) from PLCs(MP200/1). Can any body suggest what should be the scheme of data communication.
Now we want to use a windows based Level II computer which has to get data (to and fro) from PLCs(MP200/1). Can any body suggest what should be the scheme of data communication.