help needed with Taylor Software for PLC2

J_ouellet

Member
Join Date
Sep 2007
Location
Edmonton
Posts
5
Hi folks,

I'm working on an application, where I need to convert a PLC2 program, that was made with Taylor soft.

Since I don't feel like re-typing all the comments, I was wondering if anyone still had that old software, so one could open my file, then export all the comments as a text file, so I could manipulate/re-import them while converting the program.

Other than that , I don't know where I can still get Taylor's software ....

Regards,

Jas
 

Similar Topics

I have an old PLC (circa 2007) consisting of Telemecanique/Modicon/Schneider Electric devices. The system has developed errors and unfortunately...
Replies
2
Views
179
Hi I’m after some help , I have a plc program with a baumer verisens vision camera attached I have got the signals working ect but I have an...
Replies
9
Views
924
Hi all, We are facing synching issues with redundancy module, where the Primary is ending up with disqualified secondary. Normally this would...
Replies
2
Views
603
Hi all, I have got this machine that needs to be up and running soon. This machine has Schneider's Controller and I/O modules, 3 vfd's, 2...
Replies
2
Views
882
Is it possible to write to the high speed counter function file "high speed preset" on an AB micro 1100. I have the HSC set up with a MOV...
Replies
3
Views
1,073
Back
Top Bottom