View Full Version : Send Sms with Micrologix 1100 ?
September 12th, 2007, 08:53 AM
I would like to know if I can send SMS with Micrologix 1100 through the serial port or I need buy another card.
September 12th, 2007, 09:07 AM
I have the same application in the pipeline for a Micrologix 1000. Be very interested if someone could offer some advice.
September 12th, 2007, 09:26 AM
See AB knowledgebase I.D 42779
You may have to register ( its free)
http://rockwellautomation.custhelp.com/cgi-bin/rockwellautomation.cfg/php/enduser/std_adp.php?p_faqid=42779&p_created=1189128736&p_sid=1NesTwLi&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PWRmbHQ6MSZwX2dyaWRzb 3J0PSZwX3Jvd19jbnQ9MSwxJnBfcHJvZHM9MCZwX2NhdHM9MCZ wX3B2PSZwX2N2PSZwX3NlYXJjaF90eXBlPWFuc3dlcnMuc2Vhc mNoX25sJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9U01TIG1lc3N hZ2U*&p_li=&p_topview=1
September 12th, 2007, 09:34 AM
Yes, it is possible, everything ... just joking.
Depending on what type of GSM/GPRS modem you are using, you will find a set of AT commands.
The trick is to create a table which contains your messages, including the AT prefix.
Keep in mind that the modem sends info back if the message has been send or not.
September 13th, 2007, 02:30 AM
I will try to do it, I hope that everything comes out well.