PIDE controller in PLC5000

garyesmith2000

Member

G

Join Date

Jul 2007

Location

west yorkshire

Posts

19

• Sep 17, 2007

• #1

Dear All

Trying to get a PIDE controller to give output but cannot see our error.

Is there a document that clearly states which input s need enable to ensure a cv output.

 

Kim Gold

Member

Join Date

Jun 2002

Location

Stoney Creek, Ontario

Posts

241

• Sep 17, 2007

• #2

Try the following link
http://www.plctalk.net/qanda/showthread.php?t=32249

Also try a search on this forum for PIDE.

Kim

 

optimus2861

Member

O

Join Date

Apr 2006

Location

Dartmouth NS

Posts

33

• Sep 18, 2007

• #3

Check all your mode bits - make sure you are not in Override mode (that drives the output to 0, no exceptions), and make sure you are in Program and Auto modes. It should take right off then.