OT but up the flag pole anyway. I am looking for a manufacturer of a 3 phase 240v 400Hz motor. The stator OD should be about 4 inches in diameter. I know that's a farmer way to specifiy a motor but we have done some studies and that will develop much more HP than we need.
We will need about 1 to 2 hundred motors a year. That small number does not interest the manufacturers that we talked to.
Any ideas guys
If I tell you the application we will both be shot
We will need about 1 to 2 hundred motors a year. That small number does not interest the manufacturers that we talked to.
Any ideas guys
If I tell you the application we will both be shot