Connecting one SLC 5/03 to two PC's on DH485

husnain.mahmood

Member
H
Join Date
Feb 2007
Location
home
Posts
66
I am working on project where I have to connect one SLC 5/03 to Two Workstations and two MODBUS controllers, on DH485 NETWORK. I am using protocol converters DL3500 to connect MODBUS and DH485 devices. I want to know should I use AIC link coupler for these protocol converters and Workstations. I am usig PKTX card on my workstations.
Please help me as soon as possible. Please see attached pdf for Network.
 

Similar Topics

E
Connecting to DH485 port on SLC 5/03
Hello everyone, I have a question about connecting to an S500 PLC. I have been tasked with going to site and taking a backup of a program from an...
Replies
5
Views
3,836
QuicksandSlowly
Q
A
Connecting to DH485 SLC 5/02 with generic USB to RS485 converter?
Hi all, I have a SLC 5/02 that's been gathering dust for the past couple years that I want to have some fun with. The only problem is I don't...
Replies
9
Views
3,881
GaryS
G
Jeev
Connecting to SLC 5/03 through RS232, using DH485.
Hello all, I had an old machine come back in for some work. The system has an SLC 5/03 which connects to a PanelView 600 through it's CH0...
Replies
4
Views
8,173
Mickey
Mickey
Russ
Connecting a SLC 5/03(dh485) to 1400e(dh+). Is it possible?
Hi everyone, I have a slc 5/03.. and this one uses the dh485 for communication. It currently has a pv 550, also using he dh485...
Replies
4
Views
2,007
Russ
Russ
P
Connecting a new Panelview Plus to a SLC 5/04
What some ways to connect an Ethernet only PanelView Plus to a SLC 5/04 without upgrading it to a SLC 5/05?
2
Replies
16
Views
4,861
alan_505
A
Back
Top Bottom